Skip to main content
.243 WSSM

.243 WSSM

$1,249.00
(No reviews yet) Write a Review
Adding to cart… The item has been added

The basic custom upper conversion features a Shilen Stainless Match barrel with a billet, slick-side, flat-top upper receiver, and a Midwest Industries G4 handguard.  Each upper comes complete with bolt/carrier, charging handle and magazine.  These uppers can be used with any, un-modified, mil-spec lower receiver. You can switch from .223 Rem. to .25 WSSM in 20 seconds! I use Magpul anti-tilt followers as a standard feature in all of my WSSM magazines. By using these followers, I have increased the reliable capacity of the magazine and enhanced the reliability of the upper.

 

I am now offering a line of wildcat chamberings based off of the WSSM line! I have dies, reamers and barrel-blanks in stock for: .300 WSSM, and .358 WSSM. The .358 version qualifies for being Indiana big-game legal!

 

$1249.00
Standard Calibers  (.223, .243 and .25 WSSM)
Options:  

  • Custom fluting, add $129.00
  • Integral compensator, add $129.00
  • Cerakote on barrel add $100.00 (Full Cerakote services available, call for pricing.)

*Note* The new stainless steel magazines will increase your maximum COL from 2.260" to about 2.30"

 

$1299.00
Wildcat Calibers:        

  • 6.5/.243 WSSM
  • .30/.25 WSSM
  • .300 OSSM (Olympic Super Short Magnum 28* shoulder-angle)  *NEW*
  • .358/.25 WSSM  (Indiana deer legal cartridge)

Weight:

  • 22", .25 WSSM, fluted upper, complete:  5.8 lbs
  • 24", .25 WSSM, fluted upper, complete:  5.95 lbs
  • 22", .25 WSSM, un-fluted upper, complete:  6.23 lbs
  • 24", .25 WSSM, un-fluted upper, complete:  6.5 lbs

Note:  The .243 WSSM uppers in the same configuration will weigh .15 to .2 lbs more than the .25

 

Note: Where all of the Winchester factory loaded ammunition for the .223 and .243 WSSM fit perfectly in the modified AR-15 magazine, some of the .25 WSSM factory loads are slightly longer than will fit the magazine. On the 120 grain power point, I have set the bullet back about .015" and have gotten great accuracy, perfect feed and function without any measurable pressure increase. If you are going to hand-load for the .25 WSSM, the mag-length is not an issue.

!